Solid-State and solution studies of [Ln(n)(SiW11O39)] polyoxoanions: an example of building block condensation dependent on the nature of the rare earth

The reactivity of the [alpha-SiW(11)O(39)](8-) monovacant polyoxometalate with lanthanide has been investigated for four different trivalent rare-earth cations (Ln = Nd(III), Eu(III), Gd(III), Yb(III)). The crystal structures of KCs(4)[Yb(alpha-SiW(11)O(39))(H(2)O)(2)] x 24H(2)O (1), K(0.5)Nd(0.5)[Nd(2)(alpha-SiW(11)O(39))(H(2)O)(11)] x 17H(2)O (2a), and Na(0.5)Cs(4.5)[Eu(alpha-SiW(11)O(39))(H(2)O)(2)] x 23H(2)O (3a) are reported. The solid-state structure of compound 1 consists of linear wires built up of [alpha-SiW(11)O(39)](8-) anions connected by Yb(3+) cations, while the linkage of the building blocks by Eu(3+) centers in 3a leads to the formation of zigzag chains. In 2a, dimeric [Nd(2)(alpha-SiW(11)O(39))(2)(H(2)O)(8)](10-) entities are linked by four Nd(3+) cations. The resulting chains are connected by lanthanide ions, leading to a bidimensional arrangement. Thus, the dimensionality, the organization of the polyoxometalate building units, and the Ln/[alpha-SiW(11)O(39)](8-) ratio in the solid state can be tuned by choosing the appropriate lanthanide. The luminescent properties of compound 3a have been studied, showing that, in solution, the polymer decomposes to give the monomeric complex [Eu(alpha-SiW(11)O(39))(H(2)O)(4)](5-). The lability of the four exogenous ligands connected to the rare earth must allow the functionalization of this lanthanide polyanion.     

Mutagenesis Mediated by Triple Helix–Forming Oligonucleotides Conjugated to Psoralen: Effects of Linker Arm Length and Sequence Context

Targeted mutagenesis and gene knock-out can be mediated by triple helix-forming oligonucleotides (TFO) linked to mutagenic agents, such as psoralen. However, this strategy is limited by the availability of homopurine/ homopyrimidine stretches at or near the target site because such sequences are required for high-affinity triplex formation. To overcome this limitation, we have tested TFO conjugated to psoralen via linker arms of lengths varying from 2 to 86 bonds, thereby designed to deliver the psoralen at varying distances from the third strand binding site present at the 3'end of the supFG1 mutation reporter gene. Following triplex formation and UVA irradiation, mutations were detected using an SV40-based shuttle vector assay in human cells. The frequency and distribution of mutations depended on the length of the linker arm. Precise targeting was observed only for linker arms of length 2 and 6, which also yielded the highest mutation frequencies (3 and 14%, respectively). Psoralen–TFO with longer tethers yielded mutations at multiple sites, with the maximum distance from the triplex site limited by the linker length but with the distribution within that range influenced by the propensity for psoralen intercalation at A:T base-pair-rich sites. Thus, gene modification can be extended beyond the site of third strand binding but with a decrease in the precision of the targeting.     

Hydrous ferric oxide: evaluation of Cd-HFO surface complexation models combining Cd(K) EXAFS data,potentiometric titration results,and surface site structures identified from mineralogical knowledge

The surface properties of ferrihydrite were studied by combining wet chemical data, Cd(K) EXAFS data, and a surface structure and protonation model of the ferrihydrite surface. Acid-base titration experiments and Cd(II)-ferrihydrite sorption experiments were performed within 3<-log[H(+)]<10.5 and 0.5<[Cd(t)]<12 mM in 0.3 M NaClO(4) at 25 degrees C, where [Cd(t)] refers to total Cd concentration. Measurements at -5.5triple bond Fe-OH(-1/2),logk((int))=-8.29, assuming the existence of a unique intrinsic microscopic constant, logk((int)), and consequently the existence of a single significant type of acid-base reactive functional groups. The surface structure model indicates that these groups are terminal water groups. The Cd(II) data were modeled assuming the existence of a single reactive site. The model fits the data set at low Cd(II) concentration and up to 50% surface coverage. At high coverage more Cd(II) ions than predicted are adsorbed, which is indicative of the existence of a second type of site of lower affinity. This agrees with the surface structure and protonation model developed, which indicates comparable concentrations of high- and low-affinity sites. The model further shows that for each class of low- and high-affinity sites there exists a variety of corresponding Cd surface complex structure, depending on the model crystal faces on which the complexes develop. Generally, high-affinity surface structures have surface coordinations of 3 and 4, as compared to 1 and 2 for low-affinity surface structures.     

Settling of paraffin crystals in cooled middle distillate fuels

The mechanism of action of additives that control the sedimentation of paraffin crystals after their crystallization in model diesel oil has been studied by means of a new experimental approach. The chemical analysis of the crystals and detailed measurements of the sedimentation phenomenon give new insights into this complex process. Thus, the wax antisettling additives used for preventing wax crystal sedimentation adsorb at the surfaces of wax particles and provide them with enhanced colloidal stability. The settling rate is not related to the size of the crystals or the viscosity of the liquid medium, but to the ability of the additives to prevent the aggregation of wax crystals. The reported methodology makes it possible to investigate the fundamental mechanisms, but also to evaluate structure-activity relationships of the various additives used in the petroleum industry.     

CoI- and Co0-bipyridine complexes obtained by reduction of CoBr2bpy: electrochemical behaviour and investigation of their reactions with aromatic halides and vinylic acetates

The electrochemical behaviour of CoBr(2)bpy (bpy=2,2'-bipyridine) catalyst precursor in acetonitrile has been studied, revealing its possible reduction into the corresponding Co(I) and Co(0) complexes. These low-valent cobalt species appear to be stable on the time scale of cyclic voltammetry. In the presence of aromatic halides, both complexes undergo oxidative addition, the latter Co(0) species allowing the activation of poorly reactive aromatic chlorides. The arylcobalt(III) and arylcobalt(II) obtained are reduced at the same potential as the original Co(II) and Co(I) complexes, respectively, resulting in the observation of overall ECE mechanisms in both cases. The electrochemical study shows that vinylic acetates competitively react with electrogenerated Co(0) species, leading to a labile complex. Preparative scale electrolyses carried out from solutions containing aromatic halides (ArX), vinyl acetate (vinylOAc) and a catalytic amount of CoBr(2)bpy lead to a mixture of biaryl (Ar-Ar) and arene (ArH) as long as the potential is set on the plateau of the Co(II) right arrow over left arrow Co(I) reduction wave. The coupling product (Ar-vinyl) is formed only if the electrolysis is performed on the plateau of the Co(I)/Co(0) reduction wave. A mechanism is proposed for the overall cobalt-catalyzed coupling reaction between aromatic halides and allylic acetates.     

Spectroscopic Studies of Cyclometallated Pd(II) and Pt(II) Complexes: Optical absorption and emission of single crystals of [Pd(thpy)2] and [Pt(thpy)2]

The polarized optical absorption and emission (spectra, decay times) of single crystals of [Pd(thpy)₂] and [Pt(thpy)₂] (thpy ≡ C(3′)-deprotonated form of 2-(2-thienyl)pyridine) at temperatures 1.9 K ? T ? 80 K are reported. The emission of [Pt(thpy)₂] can be influenced strongly by applied magnetic fields (0 ? H ? 6 T). Depending on the central ions Pd and Pt, the lowest excited electronic states of the single complexes are ligand-centered (LC) states and metal-to-ligand charge transfer (MLCT) states, respectively. This difference leads to distinctly dissimilar properties of the emission of both compounds. The experimental data show that the emission of single crystals of [Pd(thpy)₂] and [Pt(thpy)₂] at T ? 30 K originates from several types of traps (defect states of symmetry ³B₂?stabilized below the exciton band) with LC and MLCT character, respectively. In the Pt compound, the ³B₂ is split by spin-orbit coupling into three states. The states B and A, which determine the emission properties, are separated by Δv ～ 13 cm^?1. Both states can mix under the influence of an applied magnetic field yielding an increase of the emission intensity by a factor of ～ 1.5 at H = 6 T.     

Effect of concentrate solution pH and mineral composition of a whey protein diluate solution on membrane fouling formation during conventional electrodialysis

The aim of this work was to study the effect of the concentrate solution pH and the composition in calcium, carbonate and protein of the diluate solution to be treated by conventional electrodialysis on the fouling of ion-exchange membranes. Conductivity, system resistance, pH of the diluate and cation migration were monitored to follow the evolution of the demineralization. Total cation migration was similar for all conditions although different forms of fouling were identified after three consecutive 100 min electrodialysis treatments. The nature of fouling and the membrane surface fouled depended on the concentrate pH value, the diluate mineral composition and the intrinsic composition of the whey isolate. Once conditions leading to membrane fouling were identified, an alternative configuration for our electrodialysis stack is proposed to prevent fouling onset.